The RubberBond™ FleeceBack™ EPDM Rubber Roofing System is one of the toughest materials known for resistance to weather wind and sun. It is a rubber roofing system that is designed and proven to outlast conventional flat roofing materials.
Flat roofing information and questions
What is RubberBond™ EPDM?
RubberBond™ Ethylene Propylene Diene Monomer synthetic sheet rubber membrane is a remarkable material that:
Repels all moisture, snow and rain.
Is flexible and easily bends with no stress, to follow the contours of the roof, upstands to walls, check curb edges, skylights, pipes, terminations into gutters and the like.
Can stretch with up to 300% elongation, which easily accommodates building movement.
Is not affected by extremes of temperature.
Will not tear, split or crack with age.
Is manufactured in large sheet sizes from 3.05 to metres wide and up to 30.5 metres long.
What does "FleeceBack™" mean?
This patented technology laminates a layer of non-woven polyester to the underside of the RubberBond™ EPDM resulting in:
A thicker stronger product
Over twice the thickness of standard EPDM
180%* plus greater tear resistance
60%* plus greater impact resistance
There is no shrinkage or stress to cause leaks at laps, flashings, up stands or other angle changes or penetrations
*Greater than standard 1.14-thick EPDM
Are EPDM synthetic rubber roofing membranes new?
No. The first synthetic rubber membranes, developed in America by Carlisle-Syntec™, were laid in the 1960's and are still protecting flat roofs some 40 years later.
Carlisle provides what no other single-ply manufacturer can -- over 40 years of experience, credibility and reliability.
How long will a RubberBond™ FleeceBack™ EPDM roof last for?
All evidence, real life exposure, and laboratory tests suggest that when correctly installed, a RubberBond™ FleeceBack™ roof will last in excess of 40 years.
How proven is EPDM?
Over One billion square metres of EPDM have been installed worldwide from the glaring sun of the Middle East to the Arctic conditions of Alaska. Over One hundred million square meters will be installed this year.
Is RubberBond™ EPDM synthetic rubber membrane suitable for my flat roof?
EPDM rubber is suitable for virtually all flat and low sloping roofs.
Are all roofing surveys free and without obligation?
Yes. An Independent RubberBond™ approved contractor offers a full service including, Design and specification, Written quotation.
What does RubberBond™ EPDM look like?
It has a smooth natural slate grey finish.
Can I walk on it?
Yes, it is resistant to frequent foot traffic. For heavy usage such as roof patio areas it can be overlaid with a variety of durable finishes, paving slabs, timber or plastic decking etc.
Is RubberBond™ EPDM expensive?
No, despite its considerable technical advantages it compares well with other quality roofing systems and because of its long life span will often work out to be much cheaper over time.
Is RubberBond™ environmentally friendly?
RubberBond™ EPDM is an inert material with limited environmental impact during manufacture and use of the product.
If EPDM is so good why isn't everyone using it?
The manufactures have invested millions of dollars in manufacturing processes and branding. To protect these investments only trained and approved installers that have proved they can maintain the highest of standards are allowed to use the materials. This has until recently been predominantly in the commercial sector, but is now at last also available, through approved RubberBond™ installers to residential properties utilizing the RubberBond™ EPDM roofing system.
Why do I need a RubberBond™ Approved Installer?
No matter how good a product is, quality installation is essential. RubberBond™ for your peace of mind is only available from Independent Approved Contractors who have passed a full installation training course.
Guarantee
RubberBond™ flat roofing, guaranteed for 20 years, lasts far longer!
RubberBond™ flat roofing is installed, solely by authorised roofing contractors, who are responsible for the integrity and performance of the finished roof. Where stated a RubberBond™ contractor will issue a 20 year guarantee for your flat roof.
The RubberBond™ EPDM flat roofing system is guaranteed for a period of 20 years to prevent the ingress of rain or snow subject to the following exclusions:
Storm damage such as falling roof tiles, trees, etc.
Roofing damage caused by lightning, fire, hurricanes or earthquake.
Deliberate or accidental damage.
Defects in adjoining areas such as defective tiles and coping stones, pointing, porous brickwork or render.
Deficiencies or movement in the building structure.
Damage caused by the leakage of fuels or oils.
Any claims under the guarantee that are found not to be the RubberBond™ EPDM membrane or the labour relating to it are chargeable as an inspection fee.
The Rubberbond EPDM flat roofing guarantee is valid only when signed by the contractor and full payment has been received.
